MECHANICAL (FOR X, Y AXES)
Break Out Force – 1.8N (0.4lbf)
Operating Force – 3.5N (0.75lbf)
Maximum Applied Force – 450N (100lbf)
Mechanical Angle of Movement – 40˚
Expected Life – 10 million cycles
Material – Glass filled nylon
Lever Action – Spring centering
MECHANICAL (FOR Z AXIS)
Break Out Torque – 0.09N·m (0.80lbf·in)
Operating Torque – 0.121N·m (1.07lbf·in)
Maximum Allowable Torque – 0.150N·m (1.33lbf·in)
Hand Mechanical Angle – 60°
Handle Action – Spring centering
Expected Life – 10 million cycles
ENVIRONMENTAL
Operating Temperature – -25ºC to 70ºC (-13ºF to 158ºF)
Storage Temperature – -40ºC to 70ºC (-40ºF to 158ºF)
Sealing (IP) – IP65 to IP68*
EMC Immunity Level (V/M) – IEC 61000-4-3: 2006
EMC Emissions Level – IEC 61000-4-8: 1993/A1: 2000
ESD – IEC 61000-4-2: 2008
Vibration Crash (non operational) – IAW MIL-STD-810F Method 516.5 Procedure V, Table
516.5-8 SRS (75G)
Vibration Shock (non operational) – IAW MIL-STD-810F, Method 516.5, Procedure 1, 40G
peak sine wave pulse with 11ms duration
Vibration Shock (operational) – IAW MIL-STD-810F, Method 516.5, Procedure, 20G peak
half sine wave pulse with 11ms duration
ELECTRICAL
Sensor – Hall effect
Resolution – Infinite
Supply Voltage Operating – 5.00VDC
Reverse Polarity Max – –14.5VDC
Overvoltage Max – 18VDC
Output Voltage – See options
Output Impedance – 6Ω
Current Consumption Max – 10mA per axis
Return to Center Voltage (No Load) – ±200mV
Output Ramp – See options
CANbus OUTPUT VERSION
Supply Voltage Range – 6V to 40V
CANbus Version – J1939
NOTES:
- All values are nominal
- Exact specifications may be subject to configuration.
Contact Technical Support for the performance of your specific configuration.
* Excludes some handle options
