IRR7Z262

GENERAL SPECIFICATION

• Panel thickness: 8 mm (.314) max.

• Total travel: 2.5 mm (.098) +/- 0,3 mm

• Typical operating force: 5 N +/- 2 N

• Low level or mechanical life: 200,000 cycles

• Torque: 0.8 Nm max. applied to nut

• Soldering: 320 °C max. for 3 sec.

ENVIRONMENTAL SPECIFICATIONS

• Front panel sealing: IP67 according to IEC 60529

• Shock resistance: 100 g according to IEC 512-4, test 6c

• Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d

• Salt spray: IEC 512-6, test 11f

• Operating temperature: -40 °C to +85 °C

(-40 °F to 185 °F)

ELECTRICAL SPECIFICATIONS

• Max. current/voltage rating with resistive load (gold plated contacts):

- Code 4: 100 mA 24 VDC, 200,000 cycles

- Code 7: 4 A 12VDC, 200,000 cycles

1 A 48 VDC, 200,000 cycles

3 A 48 VDC, 75,000 cycles

• Initial contact resistance: 100 m? max.

• Insulation resistance: 1 G? min. at 500 VDC

• Dielectric strength: 1,500 Vrms between terminals

MATERIALS

• Case: thermoplastic UL94-V0

• Plunger: polyamide

• Bushing/bezel: polyamide

• Contacts: silver, gold plated (codes 4 and 7)

• Multi-wire lead AWG20, section 0.6 mm2

• LED wire: AWG26, section 0.12 mm2

• Lens: polycarbonate

• Terminal seal: epoxy