ZL39S010100

GENERAL SPECIFICATION
• Strength of terminals: pull-out force 10 N max.
• Torque: 1 Nm max. applied between the 2 nuts
• Max. panel thickness: 1.5 mm (.059) with 2 nuts
• Hand soldering: 280 °C (536 °F) max. for 5 seconds max.
• Wave soldering: 260 °C (536 °F) max. for 5 seconds max.

ENVIRONMENTAL SPECIFICATIONS
• Operating temperature: -30 °C to +85 °C (-30 °F to +85 °F)
• Moisture: 21 days 95% (NFC 20-603 - IEC 8-2-3)

ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load:
- gold plated contacts: 0.4 VA 20 V max. AC or DC
- silver plated contacts: 0.5 A 48 V max. AC or DC
• Minimum load: 10 mA 50 mV - 10 µA 5 VDC
• Contact resistance: 20 mΩ max.
• Insulation resistance: 1,000 MΩ min. at 500 VDC
• Dielectric strength: 1,000 Vrms 50 Hz min. between terminals and frame, 500 Vrms 50 Hz min. between terminals

MATERIALS
• Case: thermoplastic UL94-V0
• Actuator: brass, nickel plated
• Bushing: zamak, tin plated
• Contacts and terminals:
0: brass, gold plated (standard)
1: brass, silver plated
3: brass, gold plated
(1.27 micron gold)
• Terminal seal: epoxy