GENERAL SPECIFICATION
• Panel thickness: - IZM: 3 mm (.118) max. - IZN: 4 mm (.157) max.
• Total travel: 1.8 mm (.070) +/- 0.3 mm
• Typical operating force: 6 N +/- 2 N
• Low level or mechanical life: 1,000,000 cycles
• Torque: IZN: 1 Nm max. IZM: 0.7 Nm max. applied to nut
• Soldering : 320 °C max. for 3 sec.
ENVIRONMENTAL SPECIFICATIONS• Front panel sealing: IP67 according to IEC 60529
• Shock resistance: 100g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz - 10g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)
ELECTRICAL SPECIFICATIONS• Max. current/voltage rating with resistive load:
- Gold plated silver contacts (code 4): 200 mA 48 VDC
- Silver contacts (code 2) - screw terminals: 4 A 48 VDC
• Electrical life at full load: 500,000 cycles
• Initial contact resistance: 100 m? max.
• Insulation resistance: 1 G? min. at 500 VDC
• Dielectric strength: 1,000 Vrms 50 Hz
MATERIALS• Case: thermoplastic UL94-V0
• Plunger: polyamide
• Bushing/bezel: brass, nickel plated
• Contacts: 4: silver, gold plated 2: silver (screw terminals)
• Multi-wire lead AWG20, section 0.6 mm2
• LED wire: AWG26, section 0.12 mm2
• Lens: polycarbonate
• Terminal seal: epoxy (except screw terminals)
