ICP3FAD6104

Print this page

Description

Brand APEM
Product CodeICP3FAD6104
Stock StatusPre-order
Stock0

APEM IC Series NO Red Pushbutton Switch

The IC series is a range of momentary pushbutton switches for harsh environments with short case for reduced behind-panel depth. Easier integration even in the tightest spaces.

MAIN FEATURES Short case for tight space requirements Metal bushing dia.12 mm Non-illuminated Tactile feedback Square or round actuator Glossy actuator option (round curved only) Gold plated silver contacts Sealed to IP67

23.10 €

Piece	Add to Cart
Birim Fiyat
Toplam Fiyat

Piece	Unit price	Total

Property Name	Property Value
SERIES	IC
ACTUATOR SHAPES	Round, flat
ELECTRICAL FUNCTIONS	Normally open (NO)
TERMINALS	Flying leads
CONTACTS	Silver, gold plated
ACTUATOR COLOR	Red
OPTIONS	High actuator (round models only, except with gloss finish)

We'll Call You

Description

GENERAL SPECIFICATION
• Panel thickness: 1.5 mm (.059) min. 4 mm (.157 max.)
• Total travel: 1.7 mm (.067)+/- 0.3 mm
• Typical operating force: 4 N +/- 2 N
• Low level or mechanical life: 1,000,000 cycles
• Torque: 1,5 Nm max. applied to nut
• Soldering: 320 °C max. for 3 sec

ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing: IP67 according to IEC 60529
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Robustness: IK06 according to EN 50102 (1 joule)
• Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)

ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load: 5 A 28 VDC, 70,000 cycles, 0.2 A 48 VDC, 500,000 cycles, 0.5 A 48 VAC, 500,000 cycles
• Initial contact resistance: 50 m? max.
• Insulation resistance: 1 G? min. at 500 VDC
• Dielectric strength: 1,500 Vrms 50 HZ between terminals

MATERIALS
• Case: thermoplastic UL94-V0
• Actuator: polyamide 6/6
• Bushing/bezel: zinc die-cast (zamak), black painted
• Contacts: silver, gold plated
• Multi-wire lead AWG20, section 0.6 mm2
• Terminal seal: epoxy